<img height="1" width="1" style="display:none;" alt="" src="https://dc.ads.linkedin.com/collect/?pid=64052&amp;fmt=gif">

Blog

ISO 45001 and Safety Management Software

Posted by admin on September 13, 2018
   

Safety worker seated at desk with laptop and forms

How can safety software help you comply with ISO 45001 – Occupational Health and Safety Management Systems Standard?

So, your organization has charged you and your team with implementing and complying with ISO 45001 -Occupational Health and Safety Management Systems standard and you are looking for tools; easy to use tools that will allow you to comply with this standard.  This blog article describes how safety management software in general and the IndustrySafe Safety Management software in particular can assist you with compliance of the different components of the standard, including:

  • Leadership and worker participation
  • Planning
  • Support
  • Operation
  • Performance evaluation and
  • Improvement

What is ISO 45001?

ISO 45001 Occupational Health and Safety (OH&S) Management Systems is a standard that was published in March of 2018 to help organizations reduce the occurrence of work-related accidents or diseases worldwide.  This standard replaces the OHSAS 18001, which was a British standard utilized by many organizations looking for an international uniform approach to health and safety.

Many of the differences between the new ISO 45001 standard and the OHSAS 18001 standard relate to incorporating much of the common ISO framework into health and safety management system standards.  This article from DNV-GL highlights many of these differences between the ISO 45001 and OHSAS 18001.

If you are not familiar with an ISO standard framework, ISO standards focus on a Plan-Do-Check-Act cycle and ISO 45001 is no different.

Standard Process on the Mechanism of Metal Gears.

What are the goals of ISO 45001 ?

The goals of ISO 45001 is to help your organization achieve:

a) continual improvement of OH&S performance;
b) fulfillment of legal requirements and other requirements;
c) achievement of OH&S objectives.

The ISO standard includes several clauses and appendices that specify how you can meet these goals.

Hard_Hat_Chapter_2

Leadership and Worker Participation

Clause 5 of ISO 45001 focuses on engaging leaders and workers in your OH&S management system.   This component of the standard focuses specifically on involving non-managerial workers and decreasing their barriers to participation in safety and health activities.

The standard emphasizes involving workers in hazard and risk activities, corrective actions and follow up, training and training evaluation, internal audits and incident investigation.  Many safety management software systems may have modules that address these areas, but you should look for a safety management software that engages worker participation in these areas.

For example, the IndustrySafe software has key user interface elements designed to engage employees.   The IndustrySafe public web forms allow all employees and stakeholders to enter and report hazards, incidents and inspections without logging into the system.  Employees can report hazards anonymously (mitigating fear of worker reprisal when participating in safety activities is specifically called out in the ISO 45001 standard).  IndustrySafe also has an employee user level specifically designed for employee participation.  This affordable user level allows employees to take training classes, conduct inspections and observations, follow up on corrective actions, and report incidents and hazards.

 

Planning

The planning component of ISO 45001 calls for organizations to address risk and opportunities;

  • by identifying these hazards and opportunities;
  • determining any legal requirements for OH&S and
  • planning how to address these hazard, opportunities, legal requirements and emergency situations.

Safety management software can assist in identifying hazards by providing a system to track and manage hazards using a hazard risk matrix.  Check out how to calculate risk using our risk assessment matrix.

Download our Risk Matrix Guide

The IndustrySafe safety software has a hazard module designed specifically to track and identify hazards with a built-in and configurable risk matrix.  In addition to the hazard module, multiple other modules such as incidents, job safety analysis, inspections and behavior-based safety allow for the identification and tracking of hazard risk. 

ISO45001 calls for understanding the appropriate legal and compliance requirements facing your organization.  For international organizations, compliance and legal requirements can be challenging as many countries have similar yet different requirements for reporting a worker injury for example.

Safety software that includes regulatory compliance requirements built into the software can assist your organization in achieving this compliance.  The IndustrySafe software ensures that incident reporting and its standard inspection templates meets OSHA requirements and monitors OSHA carefully so that we can update the software if regulations change.  In addition, the IndustrySafe software’s configurable design allows for organizations to modify the software to meet additional compliance regulations from other regulatory agencies or countries.

Of course, your organization has to have a plan for action to identify and address hazards, opportunities, and legal requirements.  Software can keep your organization honest by providing status updates of where you are in the planning process and providing email notification and alerts when plans, hazards, and legal requirements remain unaddressed.

Support

Group of young safety workers looking at tablet or iPad

Clause 7 of the ISO 45001 standard calls for an organization to have the following:

  • Resources - for the establishment, implementation, maintenance and continual improvement of the OH&S management system.
  • Competence - Workers are competent in OH&S, including hazard identification
  • Awareness - Workers are aware of OH&S objectives, their contribution, relevant incidents and hazards, and removing or protecting themselves from danger
  • Communication - OH&S should be communicated appropriately both internally and externally
  • Documentation - OH&S programs should be documented (including updates and controls).

Safety software can address the competence, awareness, communication and documentation of an OH&S system.   Many software systems offer the ability to train workers via video on demand or computer based training on a wide range of safety training topics providing competence and awareness as required by the ISO 45001 standard.   Of course, software that provides this training content also provides an easy to use and controlled way to document this training (and also to document instructor-led training).  Lastly, software systems can easily communicate internally to users throughout your organization via automatic email alerts, scheduled reports and more. 

IndustrySafe offers all of these features; safety training content, documentation and tracking of safety training activity (and other safety activity), alerts and scheduled reports to workers throughout the organization of this activity.  IndustrySafe includes audit logs and user controls, so IndustrySafe System Administrators can audit and control the users who access the OH&S documentation within the software.

Operation

Clause 8 focuses on operational planning and control by making sure the organization implements the processes necessary to address risk, opportunities and legal compliance.  As part of these processes, Clause 8 specifically calls out eliminating hazards and reducing risk, management of change, procurement, and emergency preparedness and response.

As we mentioned above, the IndustrySafe software provides a tool for organizations to eliminate hazards and reduce risk.  The IndustrySafe software also includes multiple organizational hierarchies to allow for an organization to manage the safety performance of multiple contractors (called out during the procurement stage).

The IndustrySafe software does not have any modules (yet) focused specifically on management of change and/or emergency preparedness and response.  The software, however, provides tools within multiple modules including our home module that can help manage those areas.   Desperate for more management of change or emergency preparedness and response components in IndustrySafe? We would love to hear from you on what you think those modules would entail.

Performance Evaluation

dashboard 4Clause 9 focuses on ensuring that your organization has a method for monitoring, measuring and evaluating the performance of your OH&S system.  As part of this performance evaluation process, ISO 45001 includes setting up a process for internal audits as well as management review.

Safety software systems can include ways to monitor, measure, and evaluate safety performance.  For example, the IndustrySafe software includes a detailed dashboard module that includes over 80 safety metrics that help our customer monitor, measure and evaluate their performance. IndustrySafe’s dashboard allows for senior managers and executives to have key review and insight into the safety activities of the organization. Like all IndustrySafe modules, you can configure this dashboard to measure the safety metrics important to your organization.

Overwhelmed by safety metrics? 

CTA-5 KPIs to Improve Performance

In addition, the IndustrySafe inspection module allows organizations to conduct internal audits of a wide range of activities including safety audits and to track the organizations compliance with key OH&S criteria.  

Improvement

Incidents 1Clause 10 of the ISO 45001 standard focuses on improvement, making sure your organization determines and implements action for improvement.   The clause specifically calls out focusing on incidents, non-conformity and corrective actions to drive improvements.  The clause also includes an emphasis on continual improvement.

Most safety software applications including incident and corrective action modules to help you track incidents and actions throughout the organization.   The IndustrySafe software is no different as we include robust incidents and corrective action modules within our solution. Our incident module allows for detailed incident investigation and tracking of a multitude of incident types (to encompass non-conformity) and our corrective action module allows for the tracking of multiple types of actions items.

If you're looking for a tool to achieve ISO 45001 compliance, sign up for a free demo of IndustrySafe today, or contact us to learn more about the IndustrySafe software.

Contact Us

Tags: Safety Management, IndustrySafe

ISbg-2-1

Free DOT Driver
Inspection Checklist

Download

Get more from a safety management software 

 

Free Demo Time Savings Calculator